Table of Contents
Advertisement
5.3.4 ABOND link stats Commands
5.3.4.1 Get abond link stats
Description:
Use this command to get.
Command Syntax:
get abond link stats [ifname <interface-name>] [lowif <lowif-val>]
5.3.4.2 Reset abond link stats
Description:
Use this command to reset.
Command Syntax:
reset abond link stats ifname<interface-name> lowif <lowif-val>
Parameters:
Name
ifname
<interface-name>
lowif <lowif-val>
Example:
$ get abond link stats ifname abond-0 lowif dsl-0
Output
ifname
ASMTxCount
TxLinkFailureReason : HecLimitExceeded
RxLinkFailureReason : HecLimitExceeded
IP DSLAM
Description
This specifies the interface index used for the ATM Based Multi
pair Bonding type of interfaces. Valid Value is abond-X
Type: Reset － Mandatory
Get － Optional
Valid values: 0 － 30
This specifies the interface index used for the abond link (DSL)
interfaces. Valid Value is dsl-X, dsli-X, dslf-X
Type: Reset － Mandatory
Get － Optional
: abond-0
lowif
: 10
ASMRxCount : 10
: dsl-0
131
Advertisement
Table of Contents
