Bridge Rlin Stance Map Commands; Get Bridge Rlinstance Map; Create Bridge Rlinstance Map; Delete Bridge Rlinstance Map - Planet IP DSLAM IDL-2400 User Manual

5.21.4 Bridge rlin stance map Commands

5.21.4.1 Get bridge rlinstance map

5.21.4.2 Create bridge rlinstance map

5.21.4.3 Delete bridge rlinstance map

5.21.4.4 Modify bridge rlinstance map

540
Description: Use this command to get.
Command Syntax: get bridge rlinstance map [portid <portid-val>]
[flowtype <flowtype-val> | bcast | unregmcast | unknownucast]
Description: Use this command to create.
Command Syntax: create bridge rlinstance map portid
<portid-val>flowtype <flowtype-val>| bcast | unregmcast | unknownucast |
instanceid <instanceid-val>
Description: Use this command to get.
Command Syntax: delete bridge rlinstance map portid <portid-val>
flowtype <flowtype-val> | bcast | unregmcast | unknownucast
Description: Use this command to modify.
Command Syntax: modify bridge rlinstance map portid
<portid-val>flowtype <flowtype-val>| bcast | unregmcast | unknownucast
[instanceid <instanceid-val>]
Parameters
Name
portid <portid-val>
Description
Bridge Port Identifier with which an instance is
associated. If the value of this field is 'All', it
indicates all bridge ports. For a particular flow,
instance map cannot be created both for a specific
port as well as for 'all' the bridge ports.
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1 - 194
IDL series User Guide