Table of Contents
Advertisement
maxgrpallowed
<maxgrpallowed-val>
querierstatus Enable |
Disable
mcastvlanstatus Enable |
Disable
nomatchaction Drop |
Transparentlyforward |
Learn
Example:
$ get igmpsnoop port info portid 6
Output:
Port Index
Port Igmp Snoop Status
IGMP PacketsPrio:2MaxGroupAllowed:2'
Querier Status
No McastVlan Match Action : Learn
Output field:
Field
Port Index
Port Igmp Snoop
Status
Leave Mode
IP DSLAM
Type: Modify -- Optional
Valid values: 0 - 7
This parameter controls the no. of simultaneous channels that
can be received by this port
Type: Modify -- Optional
Valid values: 0 - 256
This parameter controls whether a port can become querier
Type: Modify -- Optional
This parameter controls the status of Multicast Vlan option on a
port
Type: Modify -- Optional
This parameter specifies the action to be taken when multicast
vlan can not be determined for a port where multicast vlan option
is enabled Possible action values will be :Drop, Transparently
forward, and Learn based on ingress vlan
Type: Modify -- Optional
: 6
: Enable
Leave Mode
: Enable
McastVlan Status : Enable
Description
This parameter specifies a bridge port for which IGMP Snooping
needs to be enabled or disabled.
This parameter specifies whether IGMP Snooping is to be enabled
on the port.
This parameter specifies the Igmp Snooping Leave message
processing mode for the port. If the mode is set to 'Normal', the
Leave message is forwarded to the Querier. Then, based on the
Query received from Querier, the Leave processing is triggered. If
the mode is set to 'Fast', the port is immediately deleted from that
multicast group on Leave message reception and then the Leave
message is forwarded. The mode should be set to 'Fast' for a port
: Normal
457
Advertisement
Table of Contents
