Table of Contents
Advertisement
5.25.5 System info Commands
5.25.5.1 Get system info
Description:
This command to get system parameters.
Command Syntax:
get system info
5.25.5.2 Modify system info
Description:
Use this command to modify the system parameters.
Command Syntax:
modify system info [contact <sys-contact>] [name <sys-name>] [location
<sys-location>] [vendor <sys-vendor-info>] [logthresh <sys-log-threshold>]
[systime <systime>] [dst <on |off>] [timezone <timezone>]
Parameters:
Name
contact <sys-contact>
name <sys-name>
Location <sys-location>
vendor
<sys-vendor-info>
logthresh
<sys-logthreshold>
IP DSLAM
Description:
This contains the textual identification of the contact person
for this modem, together with information on how to contact
this person
Type: Optional
Valid values: String of up to 63 ASCII Characters
This specifies the name of the modem
Type: Optional
Valid values: String of up to 63 ASCII Characters
This specifies the physical location of this modem Type:
Optional
Valid values: String of up to 63 ASCII Characters
This contains the vendor-specific information
Type: Optional
Valid values: String of up to 63 ASCII Characters
This specifies the severity level of the trap equal to or lower
than that shall be logged. 1 is the lowest and represents
critical traps. Changing the parameter's value in a flashless
system shall have no effect as there is no NVRAM support
present to log traps. Type: Optional
609
Advertisement
Table of Contents
