Table of Contents
Advertisement
a. To view the Ethernet Configuration of UPLINK1, UPLINK2, or MGNT by using the
Select Ethernet drop-down list.
b. If to modify the Ethernet Configuration, click on
advanced configurations as shown in the following figure.
c. If to create a new Ethernet configuration, click on
Ethernet configuration by using Select Ethernet drop-down list. After that, users can
set related parameters as follows.
d. Click on
Configuration window.
64
to submit your settings or click on
first and then proceeding
and then select a new
to close the Ethernet
IDL series User Guide
Advertisement
Table of Contents
