Reset Rmon Queue; Rmon Net Buffers Info Commands; Get Rmon Netbuf - Planet IP DSLAM IDL-2400 User Manual

5.22.4.3 Reset rmon queue

Description:
Use this command to reset some parameters of queue. This command will reset
the following parameters of queue.
Set DropCount value to zero.
Set watermark value to the value of the currently used size of queue .
Set ThresholdCount value to the zero.
Command Syntax:
Reset rmon queue
Parameters:
None
Example:
$ reset rmon queue
Output Field:
None

5.22.5 RMON Net buffers Info Commands

5.22.5.1 Get rmon netbuf

Description:
Use this command to get the information about all the net buffers present in the
system.
Command Syntax:
get rmon netbuf
Parameters
None
Example:
$ get rmon netbuf
576
IDL series User Guide