Table of Contents
Advertisement
5.14.4 Igmpsnoop port stats Commands
5.14.4.1 Get igmpsnoop port stats
Description:
Use this command to get.
Command Syntax:
get igmpsnoop port stats [vlanid <vlanid-val>] [mcastaddr <mcastaddr-val>]
[portid <portid-val>]
5.14.4.2 Reset igmpsnoop port stats
Description:
Use this command to reset.
Command Syntax:
reset igmpsnoop port stats [vlanid vlanid] mcastaddr <mcastaddr-val> portid
<portid-val>
Parameters:
Name
-val
vlanid <vlanid
IP DSLAM
Description
The VLAN id for this VLAN. In devices supporting "Shared Vlan
for multicast" capability, the information for a multicast MAC
address is shared across VLANS. Hence, vlanid is optional and
can be passed as zero or a valid vlanid value. In devices
supporting "Independent Vlan for multicast" capability, each vlan
can have its own information for a multicast MAC address.
Hence, VLAN id is a mandatory parameter and a valid value of
vlanid must be passed. For the case when the attribute
"McastDeviceCapabilities" of MO "sysSizingTable" has value
>
"none", VLAN id is not required. This feature is not supported for
VLAN with vlanid as 4097.VLAN here means the 802.1q Vlan in
case of Native Vlan mode and Virtual Vlan in case of Stacked
Vlan Mode.
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1-4095
459
Advertisement
Table of Contents
