Table of Contents
Advertisement
configstatus normal |
config
m2vmacdbid
<m2vmacdbid-val> |
none
Example:
$create eoa intf ifname eoa-0 lowif aal5-0 m2vmacdbid 1 enable fcs false
Output:
Verbose Mode On
Entry Created
IfName
FCS
Pkt Type
InActivity Tmr Interval : 3
M2VMac Database Id
Config Status
Oper Status
Output Fields:
FIELD
IfName
LowIfName
FCS
330
Default Value: 0
This parameter describes the configuration mode for this interface.The
value of this parameter can be normal or config. If the value is config,
then this interface shall be created, but will have a dormant status. Only
after the receipt of an EoA packet from the CPE side, this interface shall
become active.
Type: Optional
Valid Values: normal | config
Default Value: normal
This field specifies the M2VMac Database Id associated with this
interface. The value 0 means Virtual MAC feature is disabled on this
interface. This field can be modified only when the interface is disabled.
Type: Create － Optional
Modify － Optional
Valid values: 1 - 1154
Default value: 0
: eoa-0
: False
: ALL
: 1
: Normal
: Down
Description
The name of the interface that has been created.
This parameter specifies the lower interface index. It
contains ifindex of the AAL5 or VC Aggregation
interface.
This specifies whether Ethernet FCS needs to be
computed for the CPE side Ethernet interfaces. This can
LowIfName
: aal5-0
Admin Status : Up
IDL series User Guide
Advertisement
Table of Contents
