Delete Atm Port; Modify Atm Port - Planet IP DSLAM IDL-2400 User Manual

5.5.4.3 Delete atm port

Description:
Use this command to delete.
Command Syntax:
delete atm port ifname <interface-name>

5.5.4.4 Modify atm port

Description:
Use this command to modify.
Command Syntax:
modify atm port ifname <interface-name>[ maxvc <maxvc-val> ] [ maxvpibits
<maxvpibits-val> ] [ maxvcibits <maxvcibits-val> ] [ oamsrc <oamsrc-val> ] [ orl
<orl-val> ] [ trfclassprofileid <trfclassprofileid-val> ] [ profilename
<profilename-val> ] [ atmtransporttype cell | packet ] [ enable | disable ]
Parameters:
Name
ifname
<interface-name>
lowif <lowif-val>
maxvc <maxvc-val>
maxvpibits
<maxvpibits-val>
IP DSLAM
Description
Physical interface index
Type: Create － Mandatory
Delete － Mandatory
Modify － Mandatory
Get － Optional
This is the IfIndex of the low interface on which this ATM port is
configured. Lower interface can be of type dsl-* or dsli-* or dslf-* or
abond-*
Type: Create － Mandatory
This specifies the maximum number of VCCs (PVCCs), supported at
this ATM interface. This field is not valid if the atmtransporttype has the
value packet
Type: Create － Optional
Modify － Optional
Valid values: 1 -8
Default value: 8
The maximum number of active VPI bits configured for use at the ATM
interface.
Type: Create － Optional
159