Table of Contents
Advertisement
Example:
$ create irl profile profilename gold irltype trtcm cir 1000 cbs 400 pir 2000 pbs
12000 conformaction colorgreen exceedaction coloryellow violateaction drop
Output:
Output field:
Field
Profile name
Profile Type
CIR(kbps)
CBS(bytes)
PIR(kbps)
PBS(bytes)
Conform action
Exceed action
Violate action
References:
IRL Commands
538
Description
Profile name uniquely identifies an IRL profile in
the system. String of up to 64 characters ( 'A'- 'Z',
'a'-'z', '0'-'9','-','_') and any combination of printable
characters excluding ';'.
This field specifies the type of IRL. Two type of
IRLs are supported. Single Rate Two Color Marker
(sr2cm) and Two Rate Three Color Marker (trtcm).
Committed Information Rate of the IRL in kbps.
This field is valid for both sr2cm and trtcm type of
profiles. The value of this field cannot be more
than PIR.
Committed Burst Size of the IRL in bytes. This field
is valid in both sr2cm and trtcm type of profiles.
The value of this field cannot be more than PBS in
case of trTcm.
Peak Information Rate of the IRL in kbps. This field
is valid only for trtcm type of profile. The value of
this field cannot be less than CIR.
Peak burst size of the IRL in bytes. This field is
valid only for trtcm type of profile. The value of
this field cannot be less than CBS.
Color type to be applied for conforming packets.
This field is valid in both sr2cm and trtcm type of
profiles.
Color for exceeding packets. This field is valid only
for trtcm type of profiles.
Color type to be applied for violating packets. This
field is valid in both sr2cm and trtcm type of profiles
IDL series User Guide
Advertisement
Table of Contents
