Output field:
Field
Expr Id
Exprstring
5.13.16 Filter list genentry Commands
5.13.16.1 Get filter list genentry
Description:
Use this command to get.
Command Syntax:
5.13.16.2 Create filter list genentry
Description:
Use this command to create.
Command Syntax:
create filter list genentry ifname <interface-name>value <value-val>] [valtype
U8 | U16 | U32]
5.13.16.3 Delete filter list genentry
Description:
Use this command to delete.
Command Syntax:
delete filter list genentry ifname <interface-name> value <value-val>
Parameter:
Name
ifname <interface-name>
IP DSLAM
Description
Unique identifier for a filter expression.
Expression string contains the expression relating the subrules of a rule using
the & (AND), | (OR), ! (NOT) operators, parenthesis (for precedance) and
actions to be executed. Valid actions are drop, allow, setprio, sendtocontrol,
retagprio, copytocontrol, gotonextrule, forwardexit. If 'ruleDir' value is 'out',
only drop, allow, gotonextrule and forwardexit action types are valid. For eg.
"(1|2):drop" will be used to drop all packets which match subrules 1 or 2.
Description
Name of ethernet, eoa, ipoe or pppoe interface, for which the
generic filter generic list is created. Valid values for the field are
between EOA-0 and EOA-23 or between eth-0 and eth-1or
between IPOE-0 and IPOE-191 or between PPPOE-0 and
371