P Commands; Bridge Port Accessprio Commands; Get Bridge Port Accessprio - Planet IP DSLAM IDL-2400 User Manual

5.2 802.1p commands

5.2.1 Bridge port accessprio Commands

5.2.1.1 Get bridge port accessprio

Description:
Use this command to get.
Command Syntax:
get bridge port accessprio [portid <portid-val>] [regenprio <regenprio-val >]
Parameters:
Name
portid <portid-val >
regenprio <regenprio-val >
Example:
$ get bridge port accessprio portid 1 regenPrio 1
Output:
PortId
AcessPriority : 0
Output field:
Field
PortId
regenPrio
AcessPriority
References:
Bridge port commands
114
Description
Port number of the port for which this entry contains bridge
management information.
Type : Get-—Optional
Valid values: 1-386
Regenerated user priority from which the access priority is
mapped.
Type : Get —Optional
Valid values: 0 - 7
: 1 regenPrio : 1
Description
Port number of the port for which this entry contains bridge
management information.
Regenerated user priority from which the access priority is mapped.
The Outbound Access Priority the received frame is mapped to.
IDL series User Guide