Atm Vcaggr Map Commands; Get Atm Vcaggr Map - Planet IP DSLAM IDL-2400 User Manual

Oper Status
Verbose Mode Off:
Entry Created
Output Fields:
FIELD
Ifname
VC MapId
default downstream
VC
Oper Status
Admin Status

5.26.2 Atm vcaggr map Commands

5.26.2.1 Get atm vcaggr map

Description:
Use this command to get.
Command Syntax:
get atm vcaggr map [mapid <mapid-val>] [vc <vc-val>]
644
: Up Admin Status : Down
Description
Name of the VC aggregation interface
It contains the Id of VcAggrMap in VcAggrMap
table. The VcAggrMap contains the list of VCs
being aggregated and the priority assignment
information. Once the aggregation interface is
created with the specified MapId, no more entries
canbe created in the VcAggrMap table for that
MapId, however the priority assignment can be
modified any time
Default VC for the VC Aggregation interface. All
the downstream priorities that are left unassigned
in the VcAggrMap table with the associated MapId,
will be mapped to the default VC. Default VC
should be one of the VCs associated with MapId in
the VcAggrMap table.
The actual/current state of the interface. It can be
either up or down.
The desired state of the interface. It may be either
Up or Down.
IDL series User Guide