Table of Contents
Advertisement
portvlanid
<portvlanid-val>
acceptframetypes all
|tagged
ingressfiltering False
|True
gvrpstatus enable
|disable
restrictedvlanreg
False |True
pktpriority
<pktpriority-val>
650
Valid values: 1 - 578
The VLAN Identifier.
Type: Modify － Optional
Valid values: 1 - 4095
When this is Tagged, the device will discard untagged
frames or Priority-Tagged frames received on this port. When
All, untagged frames or Priority-Tagged frames received on
this port will be accepted and assigned to the PVID for this
port.
Type: Modify － Optional
When this is true, the device will discard incoming frames
for VLANs, which do not include this Port in its Member set.
When false, the port will accept all incoming frames.
Type: Modify － Optional
Valid values: False, True
The state of GVRP operation on this port. The value 'enable',
indicates that GVRP is enabled on this port, as long as
'gvrpstatus' in 'GVRP INFO' command is also enabled for this
device. When this is 'disable', even if 'gvrpstatus' in 'GVRP
INFO' command is 'enable' for the device, GVRP will be
'disable' on this port. In such a case, any GVRP packets
received will be silently discarded and no GVRP registrations
will be propagated from other ports. This object affects all
GVRP Applicant and Registrar state machines on this port.
This configuration shall not be effective for a bridge port
created over PPPOE/IPOE interface.
Type: Modify － Optional
The state of Restricted VLAN Registration on this port. If the
value of this control is true(1), then creation of a new
dynamic VLAN entry is permitted only if there is a Static
VLAN Registration Entry for the VLAN concerned, in which,
the Registrar Administrative Control value for this port is,
Normal Registration. Type: Modify － Optional
Valid values: False, True
For the GVRP PDUs generated by the Control Plane, this
priority shall be used for choice of traffic class/ Queue on
outgoing interface. In case the bridge port is over an
Aggregated ATM VC, this will also be used to identify the VC,
on which the packet is to be sent.
Type: Modify － Optional
IDL series User Guide
Advertisement
Table of Contents
