Leds In Cisco Ncs 1001 - Cisco NCS 1001 Manual

LEDs in Cisco NCS 1001

Product ID
NCS1K-2KW-AC2=
NCS1K-2KW-DC=
NCS1K1-FAN=
NCS1K-SSD=
LEDs in Cisco NCS 1001
LED
SYS
BCN
SFP
PSU and FAN
OIR
Hardware Installation Guide for Cisco NCS 1001
8
Description
Network Convergence System 1001 AC power supply unit - 2KW normal operating
temperature, 600W short term high temperature
Network Convergence System 1001 DC power supply unit - 2KW normal operating
temperature, 600W short term high temperature
Network Convergence System 1001 line system Fan
SSD
State
Green
Yellow
Off
Blue
Off
Green
Yellow
Off
Green
Red
Red
Green
Cisco NCS 1001 Overview
Description
The unit is operating correctly.
The unit has one or more errors detected.
Power is not applied to the unit.
The unit needs attention.
The unit does not need attention.
The SFP link is up.
The link is down, active alarms are present
on this port, or a hardware failure has
occurred.
The port is not provisioned by the software,
the optics module is missing, or the port does
not have power.
The unit is operating correctly.
The unit has one or more errors detected.
The control card is not present or not properly
inserted.
The control card, BIOS, and software are
functional.