Rep 12.2 Paddle Belts - Xerox VersaLink B7025 Service Manual

REP 12.2 Paddle Belts

Parts List on PL 12.10
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the integrated office finisher,
2. Remove the compiler assembly, REP
3. Remove the front pulley, Figure 1:
a. Remove the E-clip (1).
b. Remove the flange (2).
c. Disengage the front paddle belt (3) from the front pulley.
d. Remove the front pulley (4).
Figure 1 Front pulley removal
Repairs and Adjustments
REP 12.2
WARNING
GP 10. Disconnect the power cord
REP 12.1.
12.19.
4. Remove the front bearing (1),
Figure 2 Front bearing removal
5. Remove the rear gear, Figure
a. Remove the E-clip (1).
b. Remove the rear gear (2).
April 2017
4-56 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 2:
3.
Figure 3 Rear gear removal
Launch Issue