Rep 5.16 Exit Motor Assembly; Rep 5.17 Document Transport - Xerox DocuColor 2240 Service Manual

REP 5.16 Exit Motor Assembly

Parts List on PL 20.9
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove Rear Cover (REP 5.18).
2. Remove Exit Motor Assembly (Figure
2
Release wires
from Clamps
3
Loosen
Screws (2)
Figure 1 Removing Exit Motor Assembly
Replacement
Belt should be tight but not stretched before tightening motor mounting screws.
Initial issue
DC 3535/2240/1632, WC M24
WARNING
1).
1
Disconnect
4
Remove
Exit Motor
Assembly
and Belt

REP 5.17 Document Transport

Parts List on PL 20.10
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove Front Cover (PL 20.1).
Document Handler rises quickly after lowering when Document Transport is removed.
2. Remove Document Transport
2
Support bottom of
Document Transport
while lifting up and
off mounting screws
Figure 1 Removing Document Transport
09/03
4-37
WARNING
CAUTION
(Figure 1).
1
Loosen screws
Repairs and Adjustments
REP 5.16, REP 5.17