Rep 22.10.1 Front/Rear Tamper Motor Assembly - Xerox WorkCentre 5222 Service Manual

Replacement
1. Reverse the removal procedure for replacement.
2. Install and align the Eject Belts with marks on the Pulleys.
Figure 4 Installing the Eject Belts (j0fa42278)
Repairs and Adjustments
REP 22.9.6, REP 22.10.1

REP 22.10.1 Front/Rear Tamper Motor Assembly

Parts List on
(Figure 4)
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1.
2.
3.
February, 2008
4-214
PL 22.10
WARNING
Remove the A-Finisher from the machine.
Remove the Compile Assembly. (REP 22.9.1)
Remove the Bracket Assembly. (Figure
(1)Release Clamps (2) and remove the wires.
(2)Remove Screws (2).
(3)Remove Bracket Assembly.
Figure 1 Removing the Bracket Assembly (j0fa42272)
(REP 22.1)
1)
Launch Version
WorkCentre 5225, 5230