Rep 1.0.1 Front Door / Tray 1 Assembly; Rep 1.0.6 Output Tray (8860Mfp) - Xerox Phaser 8860 Service Manual

REP 1.0.1 Front Door / Tray 1 Assembly

Parts List on PL 1.0
Removal
1. Open the Front Door and release the 2 Stopper Straps.
Figure 1 Releasing the Front Door Stopper Straps
2. Open the plug cover and disconnect
3. Release the wiring from cable retainers.
4. Remove the Front Door (Tray 1/MPT) by releasing the left hinge pin from the frame and
sliding the door to the right.
Initial Issue
Phaser 8860/8860MFP Service Manual
P/J650 from the right side of the Front Door .

REP 1.0.6 Output Tray (8860MFP)

Parts List on PL 1.0
Removal
1. Open the Front Cover.
Figure 1 Output Paper Tray Retaining Tabs
2. Spread the left and right sides of the Output Tray to release the 2 tabs on the bottom.
09/2007
4-5
Repairs and Adjustments
REP 1.0.1, REP 1.0.6