F10 mode options
When you launch F10 mode from the POST screen, you are able to use Intelligent Provisioning.
Intelligent Provisioning offer tools to provision and maintain servers.
Intelligent Provisioning
Provisioning multiple servers.
Configuring multiple RAID arrays.
Users who have servers provisioned and deployed.
Selecting F10 mode to use
About this
task
Procedure
1. Boot the server.
2. On the POST screen, press F10.
3. Enter Intelligent Provisioning, if Host Authentication is disabled in iLO. If Host Authentication is enabled, pass the
credentials to use Intelligent Provisioning.
Initial configuration in Intelligent Provisioning
Using the First Time Setup wizard
About this task
The first time Intelligent Provisioning runs on a server, the First Time Setup wizard guides you through selecting
preferences for your system.
The first time you launch Intelligent Provisioning you get the option to select Intelligent Provisioning.
Entering First Time Wizard settings
About this task
If you do not want to use the First Time Wizard, click the Skip button.
Procedure
1. Enter the following, or select the defaults:
•
Interface Language
•
Keyboard Language
•
Time Zone
F10 mode options
9