Running An Ilo Self-Test; Management Settings; Configuring Manager Ilo Management Settings - Hitachi HA800 Series User Manual

◦ Account Service
◦ Administer User Accounts
◦ Add User Account
• Reset Options

Running an iLO self-test

Running an iLO self-test checks the status of certain server hardware components.
Procedure
1. On the iLO Configuration Utility screen, click iLO Self-Test.
The self-tests are run, and the results screen appears.
• Tests that ran successfully are followed by a green checkmark.
• Tests that failed are followed by a red "X".
For more information about iLO self-tests and about how to interpret and troubleshoot the results, see
the iLO User Guide.

Management Settings

Configuring Manager iLO Management Settings

Procedure
1. From the main Intelligent Provisioning page, click Perform Maintenance > iLO Configuration >
Management Settings > Manager.
2. Configure the following settings:
• IPv6 Multicast Scope
• Multicast Announcement Interval
• Multicast Discovery
• Multicast Time to Live
• iLO Federation Management
• Trusted Certificate Required
• Mass Storage Authentication Required
• USB Ethernet Adapters Enabled
• USB Flash Drive Enabled
• iLO Service Port Enabled
• Video Presence Detect Enabled
• Clear Rest API Status
Performing maintenance
38