Version
7.6.1.0
7.5.1.0
pre-6.1.1.0
Usage Information
Enabling RSA authentication allows the user to log in without being prompted for a password. In addition, the
OpenSSH compatible SSHv2 RSA public key must be added to the list of authorized keys (ip ssh rsa-
authentication my-authorized-keys device://filename command).
ip ssh server
Configure an SSH server. SSH server is enabled by default.
Syntax
ip ssh server {ciphers cipher-list} {enable | port port-number} [kex key-
exchange-algorithm] [mac hmac-algorithm] [version {1 | 2}]
To disable SSH server functions, use the no ip ssh server {ciphers cipher-list} {enable |
port port-number} [kex key-exchange-algorithm] [mac hmac-algorithm] [version {1
| 2}] command.
Parameters
enable
ciphers cipher-list
1448
Security
Description
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
NOTE:
Some of the parameters in this command require licensing to access. For more information,
contact your Dell Networking representative.
Enter the key word enable to start the SSH server.
Enter the keyword ciphers and then a space-delimited list of ciphers that the SSH
server supports. The following ciphers are available.
•
3des-cbc
•
aes128-cbc
•
aes192-cbc
•
aes256-cbc
•
aes128-ctr
•
aes192-ctr
•
aes256-ctr
The default cipher list is used.
•
3des-cbc
•
aes128-cbc
•
aes192-cbc
•
aes256-cbc
•
aes128-ctr
•
aes192-ctr
•
aes256-ctr