Program Extension - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
5 Centralized Telephone Programming

Program Extension

The following sections explain the use of menu selections for programming a
single extension (Program Extension), and for using one extension as a template
for programming several extensions of the same type (Copy Extension).
NOTE: NOTE: NOTE:
It is recommended that you use the programming codes for centralized
programming; however, you may also use the
available on the programming screen. See
Codes" on page 5–7
Program Extension
Review the items below before you begin to program extensions.
Use
If you enter a feature code incorrectly or enter a feature code that is not
appropriate for the button, a beep sounds or the message
happens, press the button again and repeat the procedure.
If you make a mistake and program the wrong feature on a button, follow
the steps below:
1.
2.
3.
If you press a line button that is not active, the screen shown here appears.
Press Home to return to the Home screen.
You can use the Extension Information (
Print menu to print all of the programmed features for a specific extension.
At the Centralized Programming menu, follow the procedure below to program
features onto a single telephone.
for details about this option.
Table 5–1 to locate the code for the feature that you want to program.
appears and the green LED next to the button flashes. If this
Press the button.
Select (press
Press the button again.
"Telephone Programming
5
Ä
on the PC).
Issue 1
February 1998
Page 5-4
option that is
) report option on the