Upgrading The System - Lucent Technologies MERLIN LEGEND Release 6.0 System Programming And Maintenance Manual

MERLIN LEGEND Communications System Release 6.0
System Programming and Maintenance (SPM) 555-660-140
System Programming and Maintenance

Upgrading the System

— To save to the default print filename (
— To save to the filename of your choice, type [ filename ] and
To print the reports to a floppy disk if the print file already exists, use
the arrow keys to highlight the [ filename ] and press
Upgrading the System
!
!
WARNING:
The following procedures are to be used by qualified technicians or service
personnel only. Installation or maintenance of this product by anyone other
than qualified personnel may damage or impair the product; your limited
warranty does not cover such damage. For details, see your limited
warranty in the Customer Support Information in the back of this book.
Hazardous electrical voltages are present inside this product.
This section describes upgrading your communications system to Release 6.0.
You can use this procedure to perform the following upgrades:
From Release 1.0 to Release 6.0
From Release 1.1 to Release 6.0
From Release 2.0 to Release 6.0
From Release 2.1 to Release 6.0
From Release 3.0 to Release 6.0
From Release 3.1 to Release 6.0
From Release 4.0 to Release 6.0
From Release 4.1 to Release 6.0
From Release 4.2 to Release 6.0
From Release 5.0 to Release 6.0
press .
Issue 1
February 1998
Page 69
), press .
.