Firmware Upgrade - D-Link DGS-3000 Series Reference Manual

•
Add to group – Add a candidate to a group. Clicking this option will reveal the following dialog box for the
user to enter a password for authentication from the Candidate Switch before being added to the SIM
group. Click OK to enter the password or Cancel to exit the dialog box.
•
Remove from Group – Remove an MS from the group.
Device
•
Configure – Will open the Web manager for the specific device.
View
•
Refresh – Update the views with the latest status.
•
Topology – Display the Topology view.
Help
1. About – Will display the SIM information, including the current SIM version.

Firmware Upgrade

This screen is used to upgrade the firmware from the Commander Switch to the Member Switch. Member Switches
will be listed in the table.
To view the following window, click Management > Single IP Management > Firmware Upgrade as shown below:
The fields that can be configured are described below:
Parameter
Server IP Address
Server IPv6 Address
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 3-27 Input password window
Figure 3-28 About window
Figure 3-29 Firmware Upgrade window
Description
Enter the IP address of the TFTP server.
Enter the IPv6 address of the TFTP server.
52