Configuration Backup To Http; Configuration Backup To Tftp - D-Link DGS-1100-16 Reference Manual

Click the Restore button to initiate the configuration restore.
Click Effective immediately (running-config) to have the uploaded configuration loaded
immediately.
Click Take effect after the next boot (startup-config) to load the configuration after the switch has
been rebooted.

Configuration Backup to HTTP

This window is used to initiate a configuration file backup to a local PC using HTTP.
To view the following window, click Tools > Configuration Restore & Backup > Configuration
Backup to HTTP, as shown below:
Select Include username password to save the switch user accounts and passwords to the backup
file.
Select Exclude username password to save the switch user accounts and passwords to the
backup file.
Click the Backup button to initiate the configuration file backup.

Configuration Backup to TFTP

This window is used to initiate a configuration file backup to a TFTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration
Backup to TFTP, as shown below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
Destination File
Select Include username password to save the switch user accounts and passwords to the backup
file.
Select Exclude username password to save the switch user accounts and passwords to the
backup file.
Click the Backup button to initiate the configuration file backup.
Figure 13-9 Configuration Backup to HTTP window
Figure 13-10 Configuration Backup to TFTP window
Description
Enter the TFTP server's IPv4 address here.
Enter the destination path and location where the
configuration file should be stored on the TFTP server.
D-Link DGS-1100 Series Switch User Manual
7 7 6 6