Firmware Backup To Tftp - D-Link DGS-1100-16 Reference Manual

The fields that can be configured are described below:
Parameter
Source
Click the Backup button to initiate the firmware backup.

Firmware Backup to TFTP

This window is used to initiate a firmware backup to a TFTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to
TFTP, as shown below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
Source
Destination File
Click the Backup button to initiate the firmware backup.
Figure 13-5 Firmware Backup to HTTP window
Description
Select the source image to use for the firmware backup.
Figure 13-6 Firmware Backup to TFTP window
Description
Enter the TFTP server's IPv4 address here.
Select the source image to use for the firmware backup.
Enter the destination path and location where the firmware
file should be stored on the TFTP server.
D-Link DGS-1100 Series Switch User Manual
7 7 4 4