Mac Address Aging Time Settings; Mac Address Table - D-Link xstack DES-3810 series Reference Manual

®
xStack
Click the Apply button to accept the changes made for each individual section.

MAC Address Aging Time Settings

Users can configure the MAC Address aging time on the Switch.
To view the following window, click L2 Features > FDB > MAC Address Aging Time Settings, as shown below:
The fields that can be configured are described below:
Parameter
MAC Address Aging
Time (10-1260)
Click the Apply button to accept the changes made.

MAC Address Table

This allows the Switch's MAC address forwarding table to be viewed. When the Switch learns an association between
a MAC address, VLAN and a port number, it makes an entry into its forwarding table. These entries are then used to
forward packets through the Switch.
To view the following window, click L2 Features > FDB > MAC Address Table, as shown below:
The fields that can be configured are described below:
Parameter
Port
VLAN Name
MAC Address
Click the Find button to locate a specific entry based on the information entered.
Click the Clear Dynamic Entries button to delete all dynamic entries of the address table.
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 5-44 MAC Address Aging Time Settings window
Description
This field specifies the length of time a learned MAC Address will remain in the forwarding
table without being accessed (that is, how long a learned MAC Address is allowed to
remain idle). To change this option, type in a different value representing the MAC
address' age-out time in seconds. The MAC Address Aging Time can be set to any value
between 10 and 1260 seconds. The default setting is 300 seconds.
Figure 5-45 MAC Address Table window
Description
The port to which the MAC address below corresponds.
Enter a VLAN Name for the forwarding table to be browsed by.
Enter a MAC address for the forwarding table to be browsed by.
110