Radius; Authentication Radius Server Settings - D-Link xstack DES-3810 series Reference Manual

®
xStack
Parameter
From Port / To Port
MAC Address
Click the Apply button to accept the changes made.

RADIUS

Authentication RADIUS Server Settings

The RADIUS feature of the Switch allows the user to facilitate centralized user administration as well as providing
protection against a sniffing, active hacker.
To view the following window, click Security > RADIUS > Authentication RADIUS Server Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Index
IPv4 Address
IPv6 Address
Authentication Port (1-
65535)
Accounting Port (1-
65535)
Timeout (1-255)
Retransmit (1-20)
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Description
Use the drop-down menus to select a range of ports to re-authenticate.
Select and enter the appropriate MAC address used here. This option is only available
when the Authentication Mode has been set to MAC-based in the 802.1X Global
Settings window.
Figure 9-25 Authentication RADIUS Server Settings window
Description
Choose the desired RADIUS server to configure: 1, 2 or 3 and select the IPv4 Address or
IPv6 Address.
Set the RADIUS server IPv4 address.
Set the RADIUS server IPv6 address.
Set the RADIUS authentication server(s) UDP port which is used to transmit RADIUS
data between the Switch and the RADIUS server.
Set the RADIUS account server(s) UDP port which is used to transmit RADIUS
accounting statistics between the Switch and the RADIUS server.
Set the RADIUS server age-out, in seconds.
Set the RADIUS server retransmit time, in times.
301