Snmp Linkchange Traps Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
SNMP Traps
Authenticate Trap
Linkchange Traps
Coldstart Traps
Warmstart Traps
Click the Apply button to accept the changes made.

SNMP Linkchange Traps Settings

On this page the user can configure the SNMP link change trap settings.
To view the following window, click Management > SNMP Settings > SNMP Linkchange Traps Settings, as
shown below:
Figure 4-37 SNMP Traps Settings window
Description
Enable this option to use the SNMP Traps feature.
Enable this option to use the SNMP Authenticate Traps feature.
Enable this option to use the SNMP Link Change Traps feature.
Enable this option to use the SNMP Cold Start Traps feature.
Enable this option to use the SNMP Warm Start Traps feature.
79