Snmp Global Settings; Snmp Traps Settings - D-Link DGS-3000 Series Reference Manual

The Switch incorporates a flexible SNMP management for the switching environment. SNMP management can be
customized to suit the needs of the networks and the preferences of the network administrator. Use the SNMP V3
menus to select the SNMP version used for specific tasks.
The Switch supports the SNMPv1, SNMPv2c, and SNMPv3. The administrator can specify the SNMP version used to
monitor and control the Switch. The three versions of SNMP vary in the level of security provided between the
management station and the network device.
SNMP settings are configured using the menus located on the SNMP V3 folder of the Web manager. Workstations on
the network that are allowed SNMP privileged access to the Switch can be restricted with the Management Station IP
Address menu.

SNMP Global Settings

SNMP global state settings can be enabled or disabled.
To view the following window, click Management > SNMP Settings > SNMP Global Settings as shown below:
The fields that can be configured are described below:
Parameter
SNMP State
Click the Apply button to accept the changes made.

SNMP Traps Settings

Users can enable and disable the SNMP trap support function of the switch and SNMP authentication failure trap
support, respectively.
To view the following window, click Management > SNMP Settings > SNMP Traps Settings as shown below:
The fields that can be configured are described below:
Parameter
SNMP Traps
SNMP Authentication Trap
Linkchange Traps
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 3-32 SNMP Global Settings window
Description
Enable this option to use the SNMP feature.
Figure 3-33 SNMP Traps Settings window
Description
Enable this option to use the SNMP Traps feature.
Enable this option to use the SNMP Authentication Traps feature.
Enable this option to use the SNMP Link Change Traps feature.
55