Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Sequence ID (1-
65535)
Direction
Prefix Address
Prefix Mask
GE (1-32)
LE (1-32)
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to return to the previous window.
Click the Edit button to re-configure the specific entry.
Click the Clear button to delete the information in the Description.
IP Standard Access List Settings
This window is used to create an access list used to filter routes.
To view the following window, click L3 Features > IP Route Filter > IP Standard Access List Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Access List Name
Click the Find button to locate a specific entry based on the information entered.
Click the Add button to add a new entry based on the information entered.
Figure 5-145 IP Prefix List Settings - View Detail window
Description
Enter the sequence number for the rule entry.
Use the drop-down menu to Permit or Deny the specified network.
Enter the network address.
Enter the mask address of the network address.
Enter the minimum prefix length to be matched.
Enter the maximum prefix length to be matched.
Figure 5-146 IP Standard Access List Settings window
Description
Enter the name of the access list.
254
Advertisement
Table of Contents
