Management Options; Web-Based Management Interface; Additional Information - D-Link DGS-1100-10MP Quick Installation Manual

Management Options

The DGS-1100-10MP switch can be managed through
the Web UI or the D-Link Network Assistant (DNA)
utility.
If you want to manage only one D-Link Smart switch, the
Web-based management is the better option. Each switch
must be assigned its own IP address, which is used for
communication with Web UI. The PC should have an IP
address in the same range as the switch.
However, if you want to manage multiple D-Link switches,
the DNA utility is the better option. Using the DNA utility,
you don't need to change the IP address of your PC and it
is easy to start the initial setting of multiple switches.
Please refer to the following detailed installation instructions
for the Web-based management and DNA.

1. Web-Based Management Interface

After a successful physical installation, you can
configure the switch, monitor the LED panel and
display statistics graphically using a Web browser,
such as Microsoft Internet Explorer, Firefox, Chrome or
Safari.
You need the following equipment to begin the web
configuration of your device:
• A PC with a RJ-45 Ethernet connection
• A standard Ethernet cable
1. Connect the Ethernet cable to any of the ports in front
panel of the switch and to the Ethernet port on the PC.
2. In order to log in the Web UI, the PC must have an
IP address in the same range as the switch. For
example, if the switch has an IP address of 10.90.90.90,
the PC should have an IP address of 10.x.y.z (where
x/y is a number between 0 and 255, z is a number
between 1 and 254) and a subnet mask of 255.0.0.0.
Note: The switch's factory default IP address is
10.90.90.90 with a subnet mask of 255.0.0.0 and a
default gateway of 0.0.0.0.
3. Open your Web browser and enter http://10.90.90.90
in the address box.
Note: The Web configuration can also be accessed
through the DNA. You can click the IP hyper link in the
device list in the DNA to open the Web UI of the devices.
4. When the logon box appears, enter "admin" for the
password. Press OK to enter the main configuration
window.
2. D-Link Network Assistant
2. D-Link Network Assistant
The D-Link Network Assistant (DNA) is a program for
discovering switches with the same L2 network segment
The D-Link Network Assistant (DNA) is a program for
connected to your PC. You can install DNA through the
discovering switches with the same L2 network segment
autorun program or manually .
connected to your PC. You can install DNA through the
autorun program or manually.
Option 1: Follow these steps to install DNA via
Option 1: Follow these steps to install DNA via
the autorun program on the installation CD (in case
the autorun program on the installation CD. the installation CD is included):
1. Insert the CD into your CD-ROM drive. The autorun
1. Insert the CD into your CD-ROM drive. The autorun
program will pop up automatically.
program will pop up automatically.
2. Click on the "Install DNA (D-Li nk Network Assistant)"
2. Click on the "Install DNA (D-Link Network Assistant)"
button and an installation wizard will guide you through
button and an installation wizard will guide you
the process.
through the process.
3. After successful installing you can find the DNA
under "Start > Programs > D-Link > DNA".
3. After successful installing you can find the DNA
under "Start > Programs > D-Link > DNA".
Option 2: Follow these steps to install DNA manually
(in case the installation CD is included):
Option 2: Follow these steps to install DNA
1. Insert the CD into your CD-ROM drive.
manually.
2. From the Start menu on the Windows desktop choose
Computer.
1. Insert the CD into your CD-ROM drive.
3. Double click on your CD-ROM drive to start the
2. From the Start menu on the Windows desktop choose autorun menu, or right click on the drive to open the
folder. Select DNA (D-Link Network Assistant) and
Computer.
double click on the setup.exe file.
3. Double click on your CD-ROM drive to start the
4. Follow the on-screen instructions to install the utility.
autorun menu, or right click on the drive to open the
5. Upon completion, go to "Start > Programs > D-Link >
DNA" and open DNA.
folder. Select DNA (D-Link Network Assistant) and
Connect the switch to the same L2 network segment of
your PC and use DNA to discover the Smart switches.
4. Follow the on-screen instructions to install the
utility.
Option 3: (in case the installation CD is not included):
Option 3: (in case the installation CD is not included):
5. Upon completion, go to "Start > Programs > D-Link >
Download DNA (D-Link Network Assistant) from Google
DNA" and open DNA.
Play at https://play.google.com/store/apps/
1. Download the required software from the D-link website
on-screen instructions to install the utility.
at in the "Download" site
Connect the switch to the same L2 network segment of
section of the switch model you have purchased and
your PC and use DNA to discover the Smart switches.
unpack the archive.
For detailed information of DNA, please refer the user
2. Double click on the "Setup.exe" button to start the
manual.
installation of the software you have chosen.
3. Follow the on-screen instructions to install the utility.

Additional Information

4. Upon completion, go to "Start > Programs > D-Link >
DNA" and start D-Link Network Assistant.
To find out more about D-Link products, please visit
Additional Information
For detailed information of DNA, please refer the user
the website http://www.dlink.com/.
manual.
To find out more about D-Link products, please visit
the website
Additional Information
http://www.dlink.com/
and follow the
4