DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
7.
Quality of Service (QoS)
Basic Settings
Advanced Settings
Basic Settings
Port Default CoS
This window is used to view and configure the port's default CoS settings.
To view the following window, click QoS > Basic Settings > Port Default CoS, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Default CoS
Click the Apply button to accept the changes made.
Port Scheduler Method
This window is used to view and configure the port scheduler method settings.
Figure 7-1 Port Default CoS window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select the default CoS option for the port(s) specified here. Options to
choose from are 0 to 7. Click the Override check box to apply the
port's default CoS to all packets (tagged or untagged) received by the
port. Select the None option to use the default settings.
149