Queue Bandwidth Control Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Effective RX
Effective TX
Click the Apply button to accept the changes made.

Queue Bandwidth Control Settings

To view the following window, click QoS > Bandwidth Control > Queue Bandwidth Control Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Unit
limit.
If a RADIUS server has assigned the RX bandwidth, then it will be the effective RX
bandwidth. The authentication with the RADIUS sever can be per port or per user. For
per user authentication, there may be multiple RX bandwidths assigned if there are
multiple users attached to this specific port. The final RX bandwidth will be the largest
one among these multiple RX bandwidths.
If a RADIUS server has assigned the TX bandwidth, then it will be the effective TX
bandwidth. The authentication with the RADIUS sever can be per port or per user. For
per user authentication, there may be multiple TX bandwidths assigned if there are
multiple users attached to this specific port. The final TX bandwidth will be the largest
one among these multiple TX bandwidths.
Figure 7-5 Queue Bandwidth Control Settings window
Description
Select the switch unit to configure.
348