Bgp Community List Settings - D-Link xStack DGS-3620 Series Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Mode
Regular Expression
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.
Click the Delete button to remove the specific entry.

BGP Community List Settings

This window is used to configure the matching rules for a BGP community list.
To view the following window, click L3 Features > BGP > BGP Community List Settings, as shown below:
The fields that can be configured are described below:
Parameter
List Name
Type
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the View All button to display all the existing entries.
Click the View Detail link to view more information regarding the specific entry.
Click the Delete button to remove the specific entry.
Click the View Detail link to see the following window.
Figure 6-163 BGP AS Path Access Settings - View Detail window
Description
Use the drop-down menu to Permit or Deny advertisement based on matching
conditions.
Enter the regular expression that defines the AS path filter.
Figure 6-164 BGP Community List Settings window
Description
Enter an Autonomous System path access list name.
Use the drop-down menu to select Standard or Expanded. Standard configures a
standard community list and Expanded configures an expanded community list.
319