Mld Snooping Commands - D-Link DGS-1100-06/ME Cli Reference Manual

The MLD Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
enable mld_snooping
disable mld_snooping
config mld_snooping
config mld_snooping
mrouter_ports
config mld_snooping
querier
enable mld snooping
multicast_vlan
disable mld snooping
multicast_vlan
create mld snooping
multicast_vlan
delete mld snooping
multicast_vlan
config mld_snooping
multicast_vlan
config mld_snooping
multicast_vlan_group
show mld snooping
show mld_snooping
forwarding
show mld_snooping
group
show mld_snooping
mrouter_ports
show mld_snooping
statistic counter
clear mld_snooping
statistics counter
show mld_snooping
host
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
{forward_mcrouter only}
{forward_mcrouter only}
[vlan_name <string 20> | vlanid <vidlist> | all] {fast_done [enable | disable] |
host_timeout <sec 130-1530255> | leave_timer <sec 1-25> | router_timeout <sec
60-600> | state [enable | disable]}
[vlan_name <string 20> | vlanid <vidlist> | all] [add | delete] <portlist>
[vlan_name <string 20> | vlanid <vidlist> | all] [last_listener_query_interval <sec
1-25> | max_response_time <sec 10-25> | query_interval <sec 60-600> |
robustness_variable | state [enable | disable] | version <value 1-2>]
<vlan_name 32> <vlanid 2-4094>
[<vlan_name 32> | all]
<vlan_name 32> [[add |delete] member_port <portlist>] replace_source_ipv6
<ipv6addr>] {state [enable | disable]}
<vlan_name 32> [add |delete] ipv6_range <ipv6addr> <ipv6addr>
[vlan_name <string 20> | vlanid <vidlist> | all]
[vlan_name <string 20> | vlanid <vidlist> | all]
[vlan_name <string 20> | vlanid <vidlist> | all | ports <portlist>]
[vlan_name <string 20> | vlanid <vidlist> | all ] [dynamic | static]
[vlan_name <string 20> | vlanid <vidlist> | all | ports <portlist>]
[vlan_name <string 20> | vlanid <vidlist> | all | ports <portlist> | group
<ipv6_addr>]

MLD SNOOPING COMMANDS

155
24