L2 Features > Voice Vlan > Voice Vlan Device; L2 Features > Voice Vlan > Voice Vlan Lldp-Med Device; L2 Features > Stp > Stp Global Settings - D-Link DXS-1210-10TS User Manual

D-Link DXS-1210 Series User Manual
Figure 4.73 – L2 Features > Voice VLAN > Voice VLAN OUI
OUI Address: Specify the OUI MAC address.
Mask: Specify the OUI MAC address matching bitmask.
Description: Enter the description for the user-defined OUI with a maximum of 32 characters.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
L2 Features > Voice VLAN > Voice VLAN Device
The Voice VLAN Device page is used to show voice devices that are connected to the Switch. The Start
Time is the time when the device was detected on the port and the Status displays the voice VLAN status of
the port.
Figure 4.74 – L2 Features > Voice VLAN > Voice VLAN Device
L2 Features > Voice VLAN > Voice VLAN LLDP-MED Device
The page displays the Voice VLAN LLDP-MED voice devices connected to the Switch.
Figure 4.75 – L2 Features > Voice VLAN > Voice VLAN LLDP-MED Device
L2 Features > STP > STP Global Settings
The Switch implements three versions of the Spanning Tree Protocol: Rapid Spanning Tree Protocol (RSTP)
as defined by IEEE 802.1w, a version compatible with the IEEE 802.1D STP and Multiple Spanning Tree
Protocol (MSTP), as defined by IEEE802.1. RSTP can operate with legacy equipment implementing IEEE
802.1D, however the advantages of using RSTP will be lost.
The Rapid Spanning Tree Protocol (RSTP) evolved from the 802.1D STP standard and was developed in
order to overcome some of the limitations of STP that impede the function of some recent switching
innovations. The basic function and much of the terminology is the same and most of the settings configured
45