NEC Univerge SV8100 Features And Specifications Manual page 889

UNIVERGE SV8100
Program
Program Name
Number
90-02-01 Programming Password Setup –
User Name
90-02-02 Programming Password Setup –
Password
90-02-03 Programming Password Setup –
User Level
Operation
Refer to the UNIVERGE SV8100 Programming Manual for additional information.
SV8100 Features and Specifications Manual
Description/Comments
Use to set the system passwords.
Configure the administrator
accounts that are used when
connecting to the KTS via PCPro/
WebPro.
If using PCPro, these are the
accounts that are used to connect.
If using WebPro, these are the
accounts that are used to login.
If calls are answered by an
Auto attendant first, instead of
the DIL setup on Program 22-
01 and Program 22-07, set the
transfer destination in the Auto
Attendant to the Modem
Access Service Code.
Use to set the system password
user levels.
Assigned Data
Maximum 10 characters
User No. 1, Level 1 (MF)
User Name = nec-i,
Password = 374772
User No. 2, Level 2 (IN)
User Name = tech,
Password = 12345678
User No. 3, Level 3 (SA)
User Name = admin1,
Password = 0000
User No. 4, Level 4 (SB)
User Name = admin2,
Password = 9999
Up to eight digits
Please refer to the
SV8100 Programming
Manual for default
settings.
0 = Prohibited User
1 = MF (Manufacturer
Level)
2 = IN (Installer Level)
3 = SA (System
Administrator Level 1)
4 = SB (System
Administrator Level 2)
5 = UA (User
Programming Level 1)
Please refer to the
SV8100 Programming
Manual for default
settings.
Issue 1.0
Level
1 2 3
2 - 865