NEC Univerge SV8100 Features And Specifications Manual page 608

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 1.0
PMS Integration
With a PMS Interface Box (PMS-U10) the UNIVERGE SV8100 can support third party Property
Management System (PMS) applications. The PMS-U10 serves as a gateway between the PMS
applications, the UNIVERGE SV8100 and UM8000 Mail.
The voice mail must be licensed for the Hotel feature and have PMS enabled. Refer to the appropriate
voice mail installation manual for information on configuring the voice mail.
The UNIVERGE SV8100 and UM8000 Mail must be licensed for Hotel/Motel for this feature to work.
The supported PMS protocols are NEAX 90, NEAX 90 with NAK, KTSi and KTSi with NAK.
The chassis to PMS-U10 connection is via the LAN and an IP port only (default is 5129).
The PMS-U10 to voice mail connection is via serial port COM 2 only using a NULL MODEM or
reverse cable.
The PMS-U10 to PMS System can be done via LAN or serial port COM 1 using a NULL MODEM or
reverse cable or LAN ETH 0.
Both COM ports are fixed at 9600 bauds, 8 data bits, 1 stop bit, and no parity.
The NEAX-90 with and without NAK protocol is compatible with property management systems that
support NEAX-90 protocol. Note that not all messages or functionality supported by NEAX Model 90
protocol is implied or provided by the PMS-U10. The PMS-U10 in conjunction with the UNIVERGE
SV8100 provides a subset of features supported by NEAX Model 90 protocol.
The PMS Configurator software version 1.0.1.0 or higher is required for Microsoft Vista 32-bit
support. To check the version number (while the application is running) press ALT + V.
Refer to the UNIVERGE SV8100 Hotel/Motel Services Guide for complete programming information.
PMS Configurator Software
The PMS Configurator is used to setup the PMS-U10 for LAN access and communication between it, the
chassis and voice mail. The PMS Configurator software is supported on the following Operating Systems:
Microsoft Windows 2000
Microsoft Windows XP (32-bit)
Microsoft Vista 32-bit (version 1.0.1.0 or higher)
Room to Room Calling Restriction
Prevent guests in one room from calling guests in another – a handy feature for guests that want to
maintain their privacy. If you need to, you can always allow inter-room calling (e.g., for families or groups
that have separate rooms).
2 - 584
UNIVERGE SV8100
Hotel/Motel

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents