NEC Univerge SV8100 Features And Specifications Manual page 1070

Issue 1.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
The items highlighted in gray are read only and cannot be changed.
Program
Program Name
Number
10-03-01 ETU Setup (DLC PKG Setup) –
Terminal Type (B1)
10-03-02 ETU Setup (DLC PKG Setup) –
Logical Port Number (B1)
10-03-04 ETU Setup (DLC PKG Setup) –
Optional Installed Unit 1 (Only
Applies to DTH/DTR telephones)
10-03-05 ETU Setup (DLC PKG Setup) –
Optional Installed Unit 2
2 - 1046
Description/Comments
The system automatically assigns
the terminal type (10) for the port
which has a DSS console installed.
Use to setup and confirm the Basic
Configuration data for logical port
number (B1).
Use to setup and confirm the Basic
Configuration data for optional
installed Unit 1.
Use to setup and confirm the Basic
Configuration data for optional
installed Unit 2.
UNIVERGE SV8100
Assigned Data
1
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
0 = Not set
1 = Multiline Terminal
(1~256)
2 = SLT Adapter
(1~256)
6 = PGD(2)-U( ) ADP
(Paging) (1~8)
7 = PGD(2)-U( ) ADP
(for Tone Ringer) (1~8)
8 = PGD(2)-U( ) ADP
(for Door Box) (1~8)
9 = PGD(2)-U( ) ADP
(for ACI) (1~96)
10 = DSS (1~32)
11 = -- Not Used --
(default = 0)
0 = None
1 = APR Module
2 = APA Module
3 = ADA Module
4 = CTA/CTU Module
(default = 0)
0 = None
1 = APR Module
2 = APA Module
3 = ADA Module
4 = CTA/CTU Module
(default = 0)
SV8100/SV8300 Terminals
Level
2 3