NEC Univerge SV8100 Features And Specifications Manual page 532

Issue 1.0
System Availability
Terminals
None
Required Component(s)
CD-4COTC
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
14-02-14 Analog Trunk Data Setup – Loop
Start/Ground Start
14-02-21 FAX Branch Connection
14-05-01 Trunk Group
2 - 508
Description/Comments
Select loop start or ground start for
the trunk.
Sets CO for Fax Branch
Connection.
If FAX Branch is selected,
Program 14-10 Power Failure
Telephone Setting is NOT
valid.
Assign trunks to trunk groups
(1~100).
UNIVERGE SV8100
Assigned Data
0 = Loop Start (Loop)
1 = Ground Start
(Ground)
(default = 0)
0 = No
1 = Yes
(default = 0)
Trunk Group Number:
0~100
Priority Number:
1~200
(Default trunks 1~200 =
Priority 1~200)
Facsimile CO Branch Connection
Level
1 2 3