NEC Univerge SV8100 Features And Specifications Manual page 572

Issue 1.0
Required Component(s)
None
Related Features
Central Office Calls, Answering
Directed Call Pickup
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-12-25 Service Code Setup (for Service
Access) – Direct Call Pickup -
Own Group
11-12-26 Service Code Setup (for Service
Access) – Call Pickup for
Specified Group
11-12-27 Service Code Setup (for Service
Access) – Call Pickup
11-12-28 Service Code Setup (for Service
Access) – Call Pickup for
Another Group
2 - 548
Description/Comments
Use to customize the Service
Codes for direct call pickup – own
group.
Use to customize the Service
Codes for call pickup for specified
group.
Use to customize the Service
Codes for call pickup.
Use to customize the Service
Codes for call pickup for another
group.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 756)
MLT, SLT
(default = 768)
MLT, SLT
#
(default = )
MLT, SLT
(default = 769)
Group Call Pickup
Level
2 3