NEC Univerge SV8100 Features And Specifications Manual page 670

Issue 1.0
System Availability (US Only)
Terminals
All Multiline Terminals
Required Component(s)
PZ-32IPLA, PZ-64IPLA or PZ-128IPLA
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 2 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
The items highlighted in gray are read only and cannot be changed.
Program
Program Name
Number
10-03-01 ETU Setup (IPLA Pkg) – Trunk
Logical Port Number
10-03-02 ETU Setup (IPLA Pkg) – Trunk
Type
10-12-03 CD-CP00-US Network Setup –
Default Gateway
2 - 646
Description/Comments
Displays the port number assigned
to the IPLA.
Define if the IP Trunks are H.323 or
SIP.
Assign the default gateway IP
address for the CD-CP00-AU.
UNIVERGE SV8100
Assigned Data
1
0~200
(default = 0)
0 = H.323
1 = SIP
(default = 1)
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.254.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
IP Trunk – H.323
Level
2 3