NEC Univerge SV8100 Features And Specifications Manual page 772

Issue 1.0
System Availability
Terminals
All Terminals
Required Component(s)
Any Trunk Blade
Related Features
Automatic Route Selection
Call Appearance (CAP) Keys
Caller ID
Direct Inward Dialing (DID)
ISDN Compatibility
T1 Trunking (with ANI/DNIS Compatibility)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
2 - 748
UNIVERGE SV8100
Multiple Trunk Types