NEC Univerge SV8100 Features And Specifications Manual page 1263

UNIVERGE SV8100
Program
Program Name
Number
47-09-01 Announcement Mailbox Options –
Next Call Routing Mailbox
47-09-02 Announcement Mailbox Options –
Repeat Count
47-09-03 Announcement Mailbox Options –
Hang Up After
47-10-01 VM8000 InMail Trunk Options –
Answer Table Assignment
47-11-01 VM8000 InMail Answer Table
Options – Answer Schedule
Override
SV8100 Features and Specifications Manual
Description/Comments
If you set up an Announcement
Mailbox to answer Automated
Attendant calls, use this option to
provide additional routing options to
the Automated Attendant callers.
This option interacts with Repeat
Count and Hang Up After below.
For more detail on this interaction,
refer to Direct Announcement
Mailbox Routing and Routed
Announcement Mailbox Routing in
the VM8000 InMail System Guide.
Enter the number of times you want
the Announcement Mailbox
message to repeat to callers. After
an Announcement Mailbox caller
initially listens to the message, it
repeats the number of times
specified in this option. This option
interacts with Next Call Routing
Mailbox and Hang Up After when
providing routing options.
For more detail on this interaction,
refer to Direct Announcement
Mailbox Routing and Routed
Announcement Mailbox Routing in
the VM8000 InMail System Guide.
Use this option along with Next Call
Routing Mailbox and Repeat Count
above to provide additional routing
options to Automated Attendant
callers.
For more detail on this interaction,
refer to Direct Announcement
Mailbox Routing and Routed
Announcement Mailbox Routing in
the VM8000 InMail System Guide.
Use this option to assign an In-Mail
Answer Table to each Direct Inward
Line (DIL) the Automated Attendant
should answer. The Automated
Attendant follows the routing
specified by the selected Answer
Table.
Use this option to Enable or Disable
Answer Schedule Override for the
selected Answer Table. If enabled
(and you make an entry for Override
Mailbox below), the active Answer
Table routes calls to the Override
Mailbox.
Assigned Data
Call Routing Mailbox
Number (1~32)
0 = Undefined
(default = 0)
0 (No Repeats)
1~10
(Announcement
repeats 1~10 times)
(default = 0)
0 = None
1 = Goodbye
2 = Silent
(default = 0)
Answer Table
(1~8)
(default = 1)
0 = Disable
1 = Enable
(default = 0)
Issue 1.0
Level
1 2 3
2 - 1239