NEC Univerge SV8100 Features And Specifications Manual page 1314

Issue 1.0
Program
Program Name
Number
20-07-14 Class of Service Options
(Administrator Level) – VRS
General Message Play
20-07-15 Class of Service Options
(Administrator Level) – VRS
General Message Record/Delete
20-11-15 Class of Service Options (Hold/
Transfer Service) – VRS Personal
Greeting (Message Greeting)
20-13-23 Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
20-15-11 Ring Cycle Setup – VRS Waiting
Message Incoming Call
21-01-02 System Options for Outgoing
Calls – Intercom Interdigit Time
22-01-10 System Options for Incoming
Calls – VRS Waiting Message
Operation
22-01-11 System Options for Incoming
Calls – VRS Waiting Message
Interval Time
22-02-01 Incoming Call Trunk Setup
2 - 1290
Description/Comments
Turns an extension Off (0) or On (1)
to dial 4 or Service Code 611 to
listen to the General Message.
Turns Off (0) or On (1) an
extension for dialing Service Code
612 and record, listen to, or erase
the General Message.
In an extension Class of Service,
enable (1) or disable (0) the ability
to dial Service Code 616 to record,
listen to or erase a Personal
Greeting. This option also affects
Park and Page.
Select whether an extension should
display the reason a call is being
transferred to their extension (Call
Forward Busy, Call Forward No
Answer, DND).
Set the ring cycle callers hear when
the VRS Waiting Message feature
is used.
When placing Intercom calls, users
must dial each digit within this time.
Determine whether the VRS
Waiting Message is automatically
(0) or manually (1) set.
For VRS Waiting Message,
determine the number of seconds
between the VRS messages
(0~64800).
For each Night Service mode, enter
1 if trunk should be automatically
answered by VRS Automated
Attendant.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Disable
1 = Enable
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Ringing Cycle = 1~13
(default = 8)
0~64800 (seconds)
(default = 10 seconds)
0 = Enable Always
1 = Change by Manual
Operation
(default = 0)
0~64800 (seconds)
(default = 20 seconds)
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Voice Response System (VRS)
Level
1 2 3