NEC Univerge SV8100 Features And Specifications Manual page 1121

UNIVERGE SV8100
5. Press Hold.
6. Hang up.
To disconnect the Conference, use Forced Trunk Disconnect (i.e., Press the line key or #9 plus the trunk number +
the service code set for Forced Trunk Disconnect in Program 11-10-26).
Continue/Disconnect Codes
To use the Continue code to extend a Tandem Trunk call:
1. An external call connects to an external number either by transferring with Tandem Trunking or by
DISA caller.
2. After the programmed time (Program 24-02-07), a warning tone is heard and the user dials the
Continue code (Program 20-28-01) to extend the conversation.
3. After the programmed time (Program 20-28-03), the warning tone is heard again. After the
programmed time (Program 24-02-10), the call is disconnected.
SV8100 Features and Specifications Manual
Issue 1.0
2 - 1097