NEC Univerge SV8100 Features And Specifications Manual page 646

Issue 1.0
Program
Program Name
Number
84-06-02 PVA Data Setting – RTCP Port
Number
84-06-04 PVA Data Setting – Fract Lost
Threshold
84-06-05 PVA Data Setting – Packets Lost
Threshold
84-06-07 PVA Data Setting – Jitter
Threshold
84-06-09 PVA Data Setting – Delay LSR
Threshold
VoIP ToS Setup:
The UNIVERGE SV8100 supports Quality of Service (QoS) Marking for the Session Initiation Protocol
(SIP).
Program
Program Name
Number
84-10-01 ToS Setup – ToS Mode
2 - 622
Description/Comments
Use this program to define the Media
Gateway Starting RTCP Port
Number . The RTCP Port Number
has to be the (RTP port number + 1).
Use this program to define the
fractional lost threshold – this data
will be sent to the UNIVERGE
SV8100 CD-CP00-AU when the
value exceeds the defined value.
Use this program to define the
packet lost threshold – this data will
be sent to the UNIVERGE SV8100
CD-CP00-AU when the value
exceeds the defined value.
Use this program to define the Jitter
Threshold – this data will be sent to
the UNIVERGE SV8100
CD-CP00-AU when the value
exceeds the defined value.
Use this program to define the Delay
threshold – this data will be sent to
the UNIVERGE SV8100
CD-CP00-AU when the value
exceeds the defined value.
Description/Comments
When Input Data is set to 1, Item
No. 07 is invalid. When Data is set
to 2, Item No. 02 ~ 06 are invalid.
UNIVERGE SV8100
Assigned Data
RTP Port Number + 1
(default = 10021)
0~100%
(default = 0)
0~16777215
(default = 0)
0~4294967295
(seconds)
(default = 0)
0~4294967295
(default = 0)
Assigned Data
0 = Disable (Invalid)
1 = IP Precedence
2 = Diffserv
(default = 0)
IP Single Line Telephone (SIP)
Level
1 2 3
Level
1 2 3