NEC Univerge SV8100 Features And Specifications Manual page 1206

Issue 1.0
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group Transfer)
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-13-14 Class of Service Options
(Supplementary Service) –
Department Calling (PLT No
Called Extension)
22-02-01 Incoming Call Trunk Setup
22-07-01 DIL Assignment
24-02-05 System Options for Transfer –
Message Wait Ring Interval Time
24-02-08 System Options for Transfer –
Delayed Transfer Timer for All
Department Groups
2 - 1182
Description/Comments
Assign a Class of Service (1~15) to
an extension.
Turns Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
Turns On (1) or Off (0) the ability of
an extension in a Department
Group to use the Trunk-to-Trunk
Forwarding service codes.
Allows a busy extension ability to
Manually (0) or Automatically (1)
receive Off-Hook Signals.
Turns Off or On an extension user
ability to call a Department Group
Pilot.
If you want a trunk to be a DIL to a
Department Group, assign Service
Type 4 for each Night Service
Mode. Also see Program 22-07-01.
For each trunk assigned Service
Type 4 in Program 22-02 above,
assign the DIL destination as the
Department Group pilot number (as
assigned in Program 11-07-01).
(Department: Groups 1~64).
For Single Line Telephones (SLTs)
without message waiting lamps,
this is the time between intermittent
ringing. If this value is set to 0, the
system rings once.
Determine how long a call should
ring a Department Group before
transferring the call.
UNIVERGE SV8100
Assigned Data
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Normal
1 = VRS (second dial
tone if no VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Extension Number
(maximum eight digits)
(default not assigned)
0~64800 (seconds)
(default = 30 seconds)
0~64800 (seconds)
(default = 10 seconds)
Uniform Call Distribution (UCD)
Level
1 2 3